DIY Fabric Star Ornament
This DIY fabric star ornament is a simple, charming sewing project that brings a warm handmade touch to your Christmas decorating. It stitches up quickly, uses minimal materials, and can be customized with any fabric to match your style — rustic, vintage, modern, or completely whimsical.
Yield: 1 ornament
Equipment
- Sewing pins
- Craft scissors
- Fabric scissors
- Sewing needle
- Sewing machine
Materials
- FREE fabric star pattern linked in instructions below
- cotton fabric solid or patterned
- button optional
- 7" ribbon to match fabric
- scotch tape
- thread to match fabric
- fiber fill
Instructions
- Cut the panels: Print and cut the FREE fabric star ornament pattern, then pin it to your fabric and cut two matching star shapes.
- Sew on the button: Stitch a button to the center of the right side of one fabric panel, if using.
- Prepare the hanging loop: Shape a loop from the ribbon and place it on the right side of the other fabric panel, with the ends sitting ¼ inch above the top point of the panel.
- Join the panels: Place both panels right sides together and pin around the edges to keep the points aligned while sewing.
- Sew the star: Stitch around the edges using your machine’s presser foot as a seam guide, leave an opening in the “crotch” of the star for stuffing, and be sure to tack both sides of the opening.
- Trim the seam allowance: Trim close to the stitching all the way around the star, except at the opening, being careful not to trim the ribbon ends.
- Turn right side out: Turn the star right side out and gently push out each point using a turning tool.
- Press the opening: Fold the seam allowance at the opening inward and press it flat to create a clean edge for hand-stitching later.
- Stuff the star: Add fiber fill a little at a time, packing the points first so the ornament holds its shape evenly.
- Close the seam: Blind stitch the opening closed using small, neat stitches so the seam blends into the fabric.
Notes
- Check fabric direction: Keep printed or directional fabrics upright on both panels so the finished star hangs correctly and looks intentional.
- Secure the loop firmly: Tape the ribbon loop in place before sewing so it stays centered at the top point and doesn’t shift inside the seam.
- Trim for sharp points: Trim seam allowances closely on every point except the opening to prevent bulk and help the tips turn out crisp when turned right side out.
- Press before stitching: Iron the folded edges of the opening so blind stitching is easier, cleaner, and nearly invisible from the front.
- Stuff slowly: Add fiber fill in small amounts, shaping each point first, to avoid lumps and maintain a smooth, well-defined star shape.
