DIY Fabric Candy Corn
Bring a cozy handmade touch to your fall décor with this DIY fabric candy corn pattern. It’s simple, beginner-friendly, and a great way to use up leftover fabric scraps. Each piece adds rustic charm to your home or makes a thoughtful, affordable gift for friends and family.
Yield: 1 candy corn stuffie
Equipment
- 1 FREE pattern linked in instructions
- 1 yellow or brown cotton fabric 8x18 inches, solid or patterned
- 1 orange cotton fabric 10x14 inches, solid or patterned
- 1 white cotton fabric 7x12 inches, solid or patterned
- thread match yellow or brown fabric
- fiber fill to stuff candy corn
Materials
- sewing pins
- craft scissors for cutting pattern
- fabric scissors for cutting fabric
- sewing machine
- sewing needle to close gap used for stuffing
Instructions
- Cut the fabric: Print and cut out the free candy corn pattern. Use it to cut two pieces of each fabric color — brown or yellow for the base, orange for the center, and white for the top.
- Sew color strips together: Arrange your fabric strips in order — base, center, and top. Sew them together using a ⅝" seam allowance to form two tri-color panels.
- Press seams open: Turn each panel over and press the seams open with an iron. This helps the panels lay flat and gives your finished candy corn a neat appearance.
- Cut candy corn shapes: Place the two tri-color panels right sides together. Use the pattern to cut both layers into the candy corn shape.
- Sew panels together: Sew around the edges with the right sides still facing, using the edge of your presser foot as a guide. Leave a 2-inch gap along the bottom for turning.
- Turn and stuff: Turn your candy corn right side out through the gap. Stuff lightly with fiber fill until it holds its shape without bulging.
- Close the gap: Thread a hand-sewing needle and use a blind stitch to close the opening neatly. Match your thread to the base fabric color for an invisible finish.
Notes
- Pin fabrics before sewing: Use sewing pins to keep your fabric strips aligned for neat, straight seams that look polished.
- Press seams open after joining: Flattening the seams before cutting the candy corn shape helps the panels lay smooth and professional-looking.
- Leave a wide gap for turning: A two-inch opening at the bottom makes it easier to turn and stuff your candy corn.
- Stuff lightly for the best shape: Add just enough fiber fill for a soft, plump finish — too much will distort the shape and make sewing the gap closed difficult.
- Match your thread to the base fabric: Using thread that matches the bottom layer gives your final blind stitch a seamless, invisible finish.
- Use short, even stitches to close: A small, consistent blind stitch will secure the opening neatly making it 'disappear' seamlessly into the piece.
